DT Swiss A 1800 Spline wheelset review

By cyclist.co.uk

· 1 min. read

DT Swiss A 1800 Spline wheelset review
Source: cyclist.co.uk

DT Swiss has refreshed its budget wheel lineup with the A 1800 Spline wheelset, an alloy offering priced under £400 that applies aerodynamic technology from its premium carbon wheels. The wheelset features a redesigned 36-tooth ratchet hub system for improved engagement and wider 22mm internal rim width compared to the previous model. Testing revealed a heavier actual weight of 1,872g, vertical stiffness issues on rough roads, but solid rolling performance for endurance riding.

Key points

  • The A 1800 uses alloy construction to keep costs below £400. This budget-friendly approach makes the wheels more accessible than DT Swiss's carbon ARC 1100 Dicut wheels used in WorldTour racing.
  • The new hub features 36-tooth ratchet engagement with a 10-degree rate. This represents an upgrade from the previous 18-tooth design and aligns with higher performance wheelsets.
  • Actual measured weight came in at 1,872g, 48 grams heavier than claimed. The increased rim width from 20mm to 22mm internal width required more material, contributing to the weight gain.
  • The rim design removes water-retention holes from the previous model. The reviewer noted the old version "had a bad habit of holding water in the rim," leaving puddles on floors after wet rides.
  • Lateral and torsional stiffness make these wheels responsive at speeds above 25kmh. However, vertical stiffness creates jarring sensations on broken road surfaces, a notable drawback for winter riding conditions.
  • At 30mm depth, the wheels balance aero benefits with control across rider weights. The reviewer stated "deeper would likely mean significantly heavier" given the alloy construction limits.

Summarized by MalakyeAI

Links Cited on this Page