After nine years of development, Hamboards has released the HST 4.0 Flow Kit, a complete rebuild system for its patented spring-loaded longboard truck. The kit addresses wear issues discovered over a decade of testing and represents the final evolution of technology originally designed to make landboards feel like surfboards. The redesign solves structural vulnerabilities that plagued earlier carving truck models.
Key points
- The Wave Cam mechanism translates rider lean into spring compression for surfboard-like carving. The simple machine converts side-to-side force into vertical spring compression without rubber bushings, producing "a snappy return-to-center that mimicked how a surfboard rebounds."
- Early Wave Cam truck designs failed catastrophically when kingpins were overtightened. A locktab slot in the pivot cup created a stress concentrator that could crack the wave cam and fracture the pivot cup itself, with broken pieces potentially falling out mid-ride.
- The patented HST baseplate eliminated the structural weakness by removing the locktab slot. The redesign also restricted kingpin thread length so the nut cannot be overtightened, making the wave cam the engineered fail point rather than the expensive baseplate.
- Four generations of Wave Cam development reduced peak slot stress by 2.77 times. The fourth generation integrated the cam key into a single piece using fiber-reinforced nylon and single-axis geometry, eliminating the joint that had stressed earlier versions.
- Progressive Compression Technology uses a cone-shaped polyurethane bushing inside the spring. As riders lean deeper, the spring and bushing compress together, producing progressively stiffer force without a hard stop or permanent deformation.
- The Flow Kit is backwards compatible with all HST trucks and Original Skateboards S8 trucks. The single rebuild kit replaces every wear component—wave cams, kingpins, washers, and bushings—bringing older trucks to current 4.0 specification.
Summarized by MalakyeAI
