How to Prep Your New Icelantic Skis: Base Grind, Wax & First Tune

New Icelantic skis often arrive with a rough factory base finish, but this is normal for performance-oriented sintered bases and not a manufacturing defect. Before hitting the slopes, owners should inspect the base and edges, decide whether a professional grind is necessary, and apply fresh wax. Proper preparation takes minimal time and protects both ski performance and warranty coverage.
Key points
- Sintered bases on Icelantic freeride skis are intentionally porous to hold wax deeply. The ISOSPEED 7200 Sintered Base requires waxing to perform as designed, and "a dull, hazy factory texture is normal and is there to hold wax, not a sign of a problem."
- Check your new skis' base with a straightedge before deciding on a grind. If the base is flat and smooth with square, sharp edges, you can skip the grind and proceed directly to waxing.
- Waxing before your first day of skiing is mandatory, regardless of base condition. Use wax rated for the specific temperature and snow conditions you'll encounter.
- A professional base grind is only necessary if the base is genuinely uneven or unevenly finished. A shop can evaluate the base in about two minutes and recommend whether grinding is worthwhile.
- Improper binding installation is the primary way to void your Bombproof 3-Year Warranty. Routine maintenance like professional base grinds and edge tunes are covered; damage from DIY binding mounts is not.
- Sintered bases require regular waxing every 3 to 5 days of skiing. Dry sintered bases perform poorly, so more frequent waxing is needed in cold, dry, or abrasive snow conditions.
Summarized by MalakyeAI