State investigators release cause of Aspen Acres fire

State fire investigators determined that an uprooted Aspen tree striking energized powerlines ignited the Aspen Acres fire on June 29 in southern Colorado. The blaze consumed over 100,000 acres across Pueblo and Custer counties, destroying hundreds of homes and ranking as the state's seventh-largest wildfire. One death resulted from flash flooding caused by the fire's burn scar.
Key points
- An Aspen tree falling on powerlines at Colorado 165 and mile marker 17 caused the fire. The tree struck the lines approximately 200 feet west of the highway intersection during high winds in early morning hours.
- Burn marks and melted aluminum provided physical evidence of the ignition point. Investigators observed charring, arcing, and melting on the powerlines, with melted aluminum discovered on the ground beneath the contact area.
- Eyewitnesses reported flickering lights and smoke around 5:30 a.m. on June 29. One neighbor photographed the fire spreading uphill around 5:45 a.m. along the powerline tree line west of Colorado 165.
- Lightweight fuels and elevated wind speeds accelerated the fire's spread. The origin site contained grasses and pine needles, which combined with topography and wind to increase fire intensity and size.
- Investigators ruled out lightning, discarded smoking materials, and intentional ignition sources. STRIKEnet data detected no cloud-to-ground lightning strikes within five miles of the origin area, and "no evidence of discarded smoking materials" was found.
- Five lawsuits have been filed against San Isabel Electric Association over the fire. The utility cooperative stated it would not comment on "matters that are the subject of pending litigation."
Summarized by MalakyeAI