Mike's Mash | May Part 2
TL;DR
Michael Akira West is the Owner and Creative Director of 686 Technical Apparel. The following are some of his experiences inside and out of the industry across the globe. *Add Comments at Bottom of Page! D World May 28, 2010 The daddy of em’ all... Disney World !

Michael
Akira West is the Owner and Creative Director of 686 Technical Apparel. The
following are some of his experiences inside and out of the industry across the
globe. *Add Comments at Bottom of
Page!
D World
May 28, 2010
The daddy of em’ all... Disney World! Just like with Universal, I typically wouldn’t be here unless I had a reason to be, but after all these years, I really just think I’ve been in denial. After checking this enchanted world (and I mean WORLD- this place is huge!), I'm hooked for life. It is amazing how far your imagination can take you and the rest of the world. It was endless in Roy Disney’s mind and now it is in mine.
First let's roll through Downtown Disney and check what they have. Y’all know how much I like Legos.
They have some things I dig in one of the shops.
Slick did this a few years ago for Bloc 28. Its still dope today.
Between you and I, we were talking to Bloc 28 years ago about doing something, and I recall they were very sensitive on doing anything that would portray Mickey in a different light. I was stoked to see that Slick was able to bring his flavor into something so traditionally happy-happy.
Instead of boring you with all the narration of what I saw, heard, felt, tasted and did, check out some highlights. SHREK in 4D!
Men in B!
Holy Shit!
The Animal Kingdom is so rad!
I always vote for the villain.
Fairfax what!
The #2 best ride ever.
The #1 best ride ever.
The U Studios
May 27, 2010
I don't get to travel too often to the state they call Florida.
When I finally got a legit reason to go, like for work, I took the chance to see
this place they call Universal Studios. Yeah I know we have this down the street
from my pad in Los Angeles, but I usually don't go to amusement parks back at
home. I guess it's because it's too damn crowded or I just haven't found a
reason to go yet. In any case, I traveled all the way across the country to
check out what the U
Studios had to offer.
Hmmm... looks familiar.
Damn, no matter how old I get this still looks pretty dope.
I'm into storytelling, I always have been, but when it comes
to the amusement parks, they simply do a better job. Let's check out how Spidey
does it.
First let's get in line. Actually we're not in
line for a ride, we're actually going through the Daily Bugle.
The editor in chief.
Don't forget these.
Yes, the Spiderman ride is in 3D. It's actually more like 4D
as you not only get to see things coming at you, but you get to feel it as well.
How's it Spidey!
What the hell is coming at me?!!
After your done living the life of Spiderman, you get the
chance to "bring home" what you just felt. Biz 1
01: Identify the customer, engage the customer, get them
emotionally attached, then sell. Even I believe I want this.
Dr. Seuss is another example why you'll forever be attached
to...
...this little thing.
I'm not a super fanatic of Harry Potter...
but I do think this new experience will blow people's minds
(as it did mine) when it comes to recreating Hogwarts.
Typos
May
26, 2010
Canadian Student Nolan Herbut
recently developed an interesting take on what he calls the "Wolfgang Keyboard"
chair. I'm fascinated by all things furniture, but more importantly one of my
inspirations is to bring new life to common objects. I call this process
"Reclaiming". You'll soon see what I mean.
For now, see what Nolan does to this hand-made birch wood bench housed
with a grip full of keys.
The standard keyboard has 100 keys. This bench has over
2000.
Make the grid.
They all press down just like a functional keyboard. That's
a lot of wor
k!
The More You
Know
May 25, 2010
I'm not one to self promote.
Hell, it was tough enough to even begin this blog since I'm typically
a private person. After a year or so of doing this, I find that it's actually
kinda therapeutic (weird huh). If you check out the Mash Up, you probably know
I'd rather push my experiences than show myself. However, when Tiffany and
Shelby from "Shop-Eat-Surf" (the
leading biz trade site in our industry) asked me to tell my story on how I got
here, I thought it would be a
cool chance to let people know that anything can happen and that quality over
quantity is key.
They have a section called "Core
Careers" at the site, which features the personal paths to where
heads are today. If you're interested in hearing how skateboarding and a few
other people affected my life, check it.
Movin' It
May 24,
2010
Ever since my buddy Andy started hosting
MTV's new show "The
Ultimate Parkour Challenge" (which I thought was called something totally different), I have been engaged
in the many ways that the human body moves. I've always been fascinated in still
photos capturing a person's movement (it reminds me of when I thought I could
fly as a kid), and it's even cooler when you see it in peculiar
locations.
Parisian photographer, Denis Darzacq on Mocoloco, captures his interpretation of art
through supermarket consumerism with local street dancers. It's called "Hyper"
and will be at the Kopeikin
Gallery in Los Angeles in June.



The Other Side - The
Artery
May 21, 2010
When I first came to China
almost 20 years ago, I use to fly into the old airport in Hong Kong. I remember
it was sketchy when the plane came super close to the high-rise buildings. That
was then, but when you fly into Hong Kong now it's about 30 minutes away from
the main area which I call the "Artery" to Asia. I think that's because it is
literally a country within a country that holds every walk of life, every
cuisine and just about everything else you would need from an international
city. At the same time, it is the entrance into the most powerful country in the
world. Like always, I'm only here for one night, but I'd like to stop by and
catch up with some friends. First things first, I gotta get there. Where am I
going?

Good thing it's not that busy tonight.

Smiley face says...

For as long as I can remember, TST always looked like this...

and this.

I think Japan is rubbing some heat to Hong Kong. Pretty soon you'll be seeing your underwear in these little machines.

Where's our dinner joint at?

Eugene and Jasper always know the bomb joints to eat at. Indian food in China sits well with me...

and so does this Mango shake.

See how good that was?

Eugene got a new phone. I think his HTC is better than his old Nokia, (but not as good as mine)!

Chris says, "Made by Made by Monsters!"

LFK is madness!

Night time scenesters high above the sky in Hong Kong...

One thing I've learned from my travels is that there's an international language of "watch how much you drink and don't be the first to pass out." Jasper shows us the first step on what this means to Larry.

Larry so graciously demonstrates the last step of this simple process.

May 20,
2010
The Other Side- Food & Drinks
What's
a trip to Asia without experiencing all the great things the country has to
offer? Contrary to what people think, they have everything and more than you can
imagine (including these greas
y things).
The Chinese think of everything. When was the last time you
had gloves to eat pizza with?
No finger lickin' here.
When you visit the factory owners, they love to take you to
eat and show you a good time. I don't think I'll ever get use to drinks at noon.
This is what our table looked like for lunch.
When was the last time you had seen double yolked eggs?
How about fried spinach covered with fried scorpions?
Yes, I said scorpions!
Maybe these chicken pieces don't look bad after all. Please
pass the head, will you!
Everything tastes better when you're in the city where this
stuff is made fresh.
On another occasion, we had "hot-pot" (the Chinese version
of Shabu) for lunch. Just like all places in Asia, it's traditional to wait for
the host to determine where you will sit. It looks like we're about to play
musical chairs here.
The stuff looked really good.
Maybe I'll pass on the blood cubes this time.
More my style... I love having teppanyaki for dinner!
I also love grilled cod...
and raw beef...
but not fish eggs so much.
You can't go to a teppanyaki joint without trying the fried
rice. It's true what you've heard, the best fried rice is when you use left-over
rice. When it's all done, no single rice will stick together. It's great!
The Other Side- Places &
People
May 19, 2010
This particular trip
covered both the Northern and Southern parts of China. I was too busy admiring
the differences in the regions that I almost forgot to take pictures, but I
managed to get some in so here are a few.
One of our factories is
located next to a large elementary school. Every morning, at 10:00 am, the
whistle rings and the entire school comes out and does their exercises.
Just like back at home, kids make it all their own. Some
like it, some don't, and well... some just wanna have fun.
Another one of our factories is located in an area where the
government is planning to tear down and redevelop into a new zone. Just last
year, these buildings were packed full of people.
They were tearing down bits and pieces of it right in front
of us. Watch out or something might fall on you!
Safety first.
If you know your place is going to be "demo'd" you don't
tend to keep it maintained.
When I was in Vietnam last year, I saw an entire family of
five on one scooter! The max I could find here was only three.
In this part of China, a lot of people take the bus.
You can't see it that well here, but they sure pack people
in tight!
3-wheeled things.
Almost.
Not good for guys.
What's for dinner?
Yes, this is China.
The Other Side-Things on Your
Feet
May 18, 2010
I know the garment business
inside and out, but when it comes to footwear production, I still have a long
way to go to fully grasp all the areas of production. Just like with our garment
factories, we work with the best in the business. I've been blessed to have
solid relationships with our manufacturing team. We don't work with brokers or
with middle men. I like to be as close as possible to the heart of the process
and get to know the owners really well. There's some highly confidential things
that I can't show you, so you're gonna have to deal with a few snippets.
With every good fit, comes outlasting performance. It looks much simpler
than it seems, but developing the "perfect" fit takes a long time ...and money.
Markers and cutters are used for garments. Dyes are used for boots and
footwear.
Watch your hands!
These machines cost quite a bit, but they do a hell of a
lot.
Down the line.
Up and around.
Do you know where these end up? We have an answer (coming in September) that will
revolutionize the manufacturing process.
Color me up.
The Other Side- Quality &
Control
May 17, 2010
It's the time of year
when I pack my bags and take off for our annual Asia Production Trip. This trip
is an important one since the bulk of our business is in winter when I
personally make sure things are 100% legit before we ship anything. A lot goes
down in what I call "the other side," but to simplify things, I'm gonna
summarize my trip in a few parts. Check out the first one with quality &
control.
Things always start off with lots of people around a table
checking piles of notes on what is supposed to happen where and when.
Next is the traditional "flybys" to the factory floor.
Although most of our goods are already packed and ready to
ship, we have a few late releases that are currently in production. I like to
take walkthroughs from beginning to end starting with the fabrics.
To the cutting floor...
Back in the day, when I produced my goods in Downtown, L.A.,
I remember making all the markers for the patterns to cutting a few by myself.
I've got nothin' on these skilled cutters!
A sneak peak into something to come.
There's so many steps that go into making one of our
garments, it's overwhelming to the average person. Sewing is a huge part of it,
but there's about 100 different sewing steps in one of our jackets. Here is just
one.
686 is a company with purpose. After we make it
look good, we have to make sure it is functional- made for the purpose of
keeping you warm and dry. Waterproofing the garment with custom made taping on
all seams is just one component.
The trim process is equally important and is done at certain
points in the overall manufacturing process. Bungee cords are started here (but
not finished) while the jacket is turned inside out with the insulation showing.
In my world, I call the trims the jewelry of the garment.
It's important to us to use the highest
quality jewelry to finish our garments. Even if they are things that you can't
necessarily see, (like this custom made YKK
machine to match our custom YKK eyelits).
Finishing is making sure that everything is in line with
what's expected.
We have a strict policy on what we expect to see at 686. Packing instructions are physically placed
in front of the tables so each inspector knows what they're looking for. It
kinda looks like this Gore-Tex one.
A lot of factories don't steam the garments. I don't care
too much about what other people do. I want all my garments to be nice, neat and
never wrinkled. (It takes a very skilled steamer to make sure they do it just
right on the technical garments.)
Stack 'em up.
We're known for having our goods look 100% legit right from
the bag. This means every hang-tag, every label, every 686 giveaway is placed
correctly. We even have directions on which sleeve and hood is folded where.
These puppies are just about ready to go through this process.
Pack 'em up.
Ship 'em out. 
View Previous Post &
Comments
May
2010: Part 1
April
2010: Part 1
April
2010: Part 2
March
2010: Part 1
March 2010: Part 2
February
2010