In My Own Words
Conscientious Mechanical Engineer with a focus on designing, 3D modeling, and analysis. Has 2+ years of combined experience as a design engineer and can perform primitive structural and flow analyses on nuclear reactor tubes and industrial oven models. Has 2.5 years of leadership and team-management experience working as a Radiation Safety Engineer at the University of Illinois at Chicago.
Work Experience
Research Assistant
University of Illinois at Chicago2018 – 2020
• Analyzed and investigated the effect of 3 distinctive additives on ice adhesion as a part of MS Thesis. • Designed and assembled an ice adhesion test setup and an environmental chamber to compute the ice adhesion strength of 6 unique materials. • Achieved a 100% reduction in the ice adhesion strength on familiar surfaces from ˜1000kPa to ˜1kPa . • Established a unique failure mechanism for additive-infused ice.
Graduate Assistant
UIC Environmental Health & Safety Office2018 – 2020
• Implemented root cause analysis for decontamination surveys at UI Health and enforced process changes saving $6000 monthly. • Spearheaded, executed and managed the radiation contamination surveys for UI Health and 70+ labs across the UIC campus. • Conducted the calibration of 100+ Geiger counters and ionization chambers. • Directed, coordinated, and organized the radioactive material inventory, waste inventory, and waste disposal for 70+ labs across UIC.
Mechanical Engineer Intern
Bellman Melcor Inc2018 – 2018
• Designed a 2D model (AutoCAD), 3D model (SolidWorks), and Bill-of-Materials (BOM) of the industrial ovens used for hardening the channel flux for simulation and analysis. • Employed finite element analysis (ANSYS) to evaluate the heat distribution inside the ovens. • Implemented design changes that improved heat distribution, increasing the product quality by 25%. • Proposed ergonomic design changes to improve human-machine interaction.
Project Trainee
Bhabha Atomic Research Centre2016 – 2017
Developed a simulation of creep and high-temperature deformation behavior of fuel-clad nuclear reactor tubes under a postulated loss- of-coolant accidental condition for a Pressurized Heavy Water Reactor. • Formulated a 3D model (Inventor) of the reactor tubes and simulated its behavior inside the pressure core of the nuclear reactor. • Conducted a 3-step analysis to formulate a suitable material constitutive model for creep behavior. • Verified the devised model using existing experimental data and derived the burst times for a range of temperatures (600°C to 1000°C) and internal pressures (3 bar to 60 bar).
Education
Master of Science in Mechanical Engineering
University of Illinois at Chicago2017 – 2020
Master of Science in Mechanical Engineering
Bachelor of Engineering in Mechanical Engineering
University of Mumbai2013 – 2017
Bachelor of Engineering in Mechanical Engineering