SS

Shantanu Sabade

Product Engineer (Design Release Engineer) · Caterpillar

Tucson, AZ

Work Experience

Product Engineer (Design Release Engineer)

Caterpillar

2019 – Present

? 796 and 798 Canopy Extension: Designed 15+ components such as bent plates, spring plates, gussets and supports to form a canopy extension assembly. Made design changes to make the parts feasible for manufacturing. Prepared reports for assembly instructions for the customer, showed weld symbols/callouts and GD&T details. (DFM, Sheet Metal, Weld Call outs, CPI, Creo) ? Rock ejector for 797, 794 CAT truck body: Improved the efficiency of existing design by designing 20+ new components such as pins, bars, stoppers and plates for rock ejector assembly to meet the requirements of application. Performed modal and static analysis to extract stresses induced in plate assembly followed by buckling analysis. Made design changes to reduce the buckling in plates. (PTC Creo 4.0, Creo Simulate, Sheet metal design, 3D Models, GD&T, Design for manufacturing, design release, NPI) ? Liners for 789, 793 & 797 CAT truck body: Designed and released 25+ plates of 12mm and 25mm thickness for liner assemblies using Creo 4.0. Defined weld callouts so as to maintain min weight and max rigidity. (Creo 4.0, Teamcenter, Design release) ? Rock shedders for 793 CAT truck body: Designed rock shedders to sustain maximum loads. Based on FEA results, made design changes to baseline and established a life improvement by 4 times. (Creo 4.0, Creo Simulate, CAD, GD&T, ProE) ? 789 Rock guard assembly: Introduced a completely new concept and developed new design to protect antennas and canopy decal against rocks. Developed different designs to achieve optimum weight, FEA and customer requirements at same time. Rolled a change by modifying existing designs of decal, gusset plates and eyebrows. Trimmed the canopies to meet the challenges at working site (Field). (Creo 4.0/ProE, CAD, NPI, Teamcenter, Sheet metal, Engineering change requests/notice). ? Body guide brackets for 794, 796 and 798 CAT truck: Optimized the design to improve the fatigue life of body guide brackets by 6 times. Performed topology optimization to reduce the weight. Made the design feasible to fit the space claims and assembly constraints. (CAD - Design, Topology optimization, Creo, Fatigue life improvement, NPI Issue, Sheet Metal Design) ? 785 Truck Body Manufacturing Updates: Rolled a design change to improve weld quality and rigidity. Changed the design of sideboard to improve manufacturing feasibility. Introduced backing strips to improve structural stability. (Creo, DFM, Efficiency)

Intern at Eleation, India

FSAE/BAJA

2018 – 2018

? Steering of an automobile: Performed fatigue analysis of rack and pinion using static conditions to determine fatigue life and damage. Recommended best material after validation of results. (Gears, Automobile, FEA, ANSYS, structural, Creo 3.0) ? Determined the critical frequency at which the maximum amplitude occurred by performing harmonic and modal analysis. ? GearBox: Modeled and assembled gearbox components by finalizing product size and material type. Determined maximum stress and prevented system failure by conducting CAE analysis in ANSYS. (Gears, Damage, fatigue life, ANSYS, Creo 3.0)

Product Design (CAD/FEA/CAE) Intern

BorgWarner Morse Systems

2018 – 2018

Facilitated design and FEA analysis of an automobile hydraulic phaser, for large-scale automotive clients such as Jaguar, Ford, and Mahindra. Collaborated with a team of 7, assisted with designing and testing of prototype parts, and prepared customer reports. ? Improved phaser performance by 15% by securing an actuation rate of 150 deg/s Optimized the design by changing rotor thickness, adjusting swept volume, and testing multiple bias springs. (Creo 3.0, CAD, Hydraulics, Drivetrain) ? Provided solutions and made design changes using Catia after carefully studying FEA and mechanical testing results. (Creo 3.0) ? Studied CAD models in depth and explained it to engineering teams to get manufacturing details. (Creo 3.0, AutoCAD) ? Modified the baseline design of seat geometry to reduce the oil leakage by 5%. (Creo 3.0, AutoCAD) ? Verified the output of assemblies by performing simulations. (Creo 3.0, design verification) ? Analyzed and identified design risk via DFMEA and generated product designs which meet customer and product requirements. ? Made computations to determine tolerance stack up of machined components and revised existing drawings as required by manufacturing feasibility. Participated in design reviews and supported development of new products. (ECR, GD&T, LABVIEW) ? Recommended appropriate design changes to drafting personnel. Took the responsibility of transforming drawings into working 3D models by using Catia V6 (ANSI 14.5, Tolerance stack up analysis) ? Validated the design of new products and product enhancements by completing various analyses such as stack-ups, DFMEA, Finite Element Analysis, Design for Assembly/ Manufacturing studies. (DFM/DFA, GD&T, LABVIEW) ? Carried out EOL, leak and flow testing of 25-30 phasers daily to validate the functionality and feasibility. (LABVIEW Testing)

Catia and FEA Analysis (Mechanical) Intern

Composite

2017 – 2017

? Conducted structural analysis of a sandwich and rib-stiffened composite water tank cover. Determined a cost-efficient and secure design by conducting FEA analysis for 3 cases. Indicated 5% reduction in stresses and 18% reduction in displacement. ? Introduced engineering concepts by generating 2D drawings. (CATIA V6, CAD) ? Suggested different materials to get better results. Created and assembled the plies to get different combinations of laminate. ? Assured appropriateness of mechanical design, dimensional accuracy and completeness of details, notes, views. (CATIA V6, CAD) ? Suggested improvements in existing design to get better results and good accuracy. (Catia V6, CAD) ? Used independent feature modelling technique to create 2D/3D models, surfaces, assemblies and drafting in Catia V6. (Catia V6) ? Structural integrity of the panel was evaluated under G-loads, external force and pressure. (Hypermesh, FEA/CAE) ? Provided solutions to obtain better feasibility and implemented techniques to improve stiffness. (CAE/FEA) ? Tools: Catia V6- Surfacing, Hypermesh-Optistruct, Independent Feature Modeling Techniques, Composites

Tool designing and Manufacturing Intern

Endurance Pvt. Ltd

2014 – 2015

? Increased Crankcase productivity from 19.5% to 21.5% by reducing cycle time and saving space. ? Worked with a team of 5, created 3D models and bill of materials, and improved dimensional stability. (Creo/ProE2.0, AutoCAD) ? Cut down cycle time by 15% and saved cost by decreasing the number of tools by 5. ? Tooling investment was reduced by $1000. (Tooling cost reduced, ECRS, MUDA Principles) ? Created 3D models and bill of materials (BOM) using Creo/ProE 2.0. ? Implemented efficient solutions to improve design aspects like shank length, diameter of tool. (AutoCAD, Creo/ProE 2.0) ? Made design changes in Crankcase and manufacturing tools (Creo/ProE 2.0). FEA analysis was done to validate the design. ? Modified the G-code programming and optimized the manufacturing process by using CAM software. (G-coding, CNC, HMC) ? Manufacturing process was optimized and cycle time was reduced by 15%. (cycle time reduction) ? Tools & Processes: AUTOCAD, Ansys, Tool optimization, ASME Y 14.5, GD&T, Tolerance stack up analysis, Creo/ProE 2.0.

FEA and CAD Projects ? FEA Analysis and Topology Optimization of Bell Crank. ? Shaper Tool Head Mechanism. ? Topology Optimization of Skateboard. ? Off-shore BOP Platform. ? Bird-Airplane Modeling and Crash Analysis: ? Designed the components of an AC-40 blower ? Multi sized ring expansion.

Education

MS Mechanical Engineering

Purdue School of Engineering and Technology, IUPUI

2018

MS Mechanical Engineering

Bachelor of Engineering

University of Pune

2015

Bachelor of Engineering