Quality control clothing manufacturing: A Brand’s Guide

By Bryden

· 1 min. read

Quality control clothing manufacturing: A Brand’s Guide
Source: Bryden

Clothing manufacturers must implement quality control checks at multiple production stages to catch defects before bulk orders ship. The process spans pre-production material inspection, inline checks during manufacturing, and final inspection against industry standards. Without structured quality control, defects invisible in approved samples can affect entire bulk orders, potentially costing brands 15-20% of revenue through scrap, returns, and rework.

Key points

  • Quality failures cost apparel brands 15-20% of revenue through multiple channels. Common defects include measurement deviations, stitching problems, and colour inconsistencies that should have been caught during production control.
  • Pre-production inspection happens before fabric cutting begins. Material inspection confirms fabric specifications match the tech pack, and pre-production sample approval uses actual production fabric to establish the reference standard for the entire run.
  • Inline inspection during production catches defects early enough for correction. "Factories that only inspect at the end of production are operating without meaningful production-stage quality control," according to Donovan from Bryden Apparel.
  • AQL (Acceptable Quality Level) is the international standard defining acceptable defect rates. AQL 2.5 is standard for major defects, AQL 4.0 for minor defects, and AQL 0 for critical defects; for a 1,000-unit order at AQL 2.5, inspectors can find maximum 5 defects in an 80-unit sample.
  • Brands should specify AQL requirements in purchase orders before production starts. Without explicit AQL specifications, factories apply their own internal standards, which may be more lenient than brand expectations.
  • Third-party inspections for new factory relationships cost $300-500 and provide independent verification. "The inspection cost is always lower than the cost of resolving a failed shipment after it has shipped," Bryden Apparel advises.

Summarized by MalakyeAI

Links Cited on this Page